Over the years a few videos featuring the B5 S4 have been produced by owners. I thought now may be a good time to hold a contest where B5 S4 videos are featured and a ‘best’ video is voted upon by other enthusiasts. A cash prize could be awarded to the top vote getter(s).
The purpose of this poll is to find if there is enough interest in holding such a contest.
[socialpoll id=”2487843″]A Subaru owner contacted me about putting their airbox on the flowbench to determine how closely the Subaru table for MAF voltages matched with real airflow.
I ran this experiment with the S4 MAF Sensor and did not get a very good match so I was interested to see how things would turn out with the Subaru setup.
Because the voltage from the MAF sensor is not read by the hardware for measuring the flow bench airflow and pressure drop I needed to hook up a multimeter to the MAF sensor 5V output wire and take manual readings at various airflows. Although this method is not a precise as it would be if all sensor values were read by the same datalogger, the results were good.
Agreement between the Subaru MAF table values and the measurements taken on the flow bench were good.